AGI Graphics

Combi Flexo

  • Simultaneous development of the entire surface of the slab
  • Pre-exposure
  • Main exposure with pump and vacuum gauge
  • Fixing plate on the floor with automatic rolling sticky plate
  • Development Set with Brush Height Adjustment Settable by PLC and Alternate Orbital Brush System
  • During the washing, the slab bearing floor has its own alternating movement
  • Final cleaning compartment with a rotary cylindrical brush
  • Drying compartment with 2 independent drawers
  • Post-exposure and anti-tack subdivision with LED status indicators
  • Separate suction systems for washing / oven and for post exposure / anti-tack
  • 9-channel touch screen controller for each of the desired thickness and relief: pre-exposure time, main exposure, washing time, automatic regeneration after exposure, anti-tack, time for each of the 2 drawer units
  • Automatic solvents loading and unloading
  • Check levels in the tub
  • Check loading and unloading drum levels
  • Thermostat and dryer temperature control

Combi Flexo

Specifications

27/35 30/40 36/47 42/60
Max Sheet Size (mm) 700x900 780x1067 920x1200 1070x1530
Max Sheet Size (inches) 27"x35" 31"x42" 36"x"47 42"x60"
Quantity of bath development (l) 90 90 120 140
UVA exposure lamps N.16 60W 10R L.1200 N.16 60W 10R L.1200 N.18 80W 10R L.1500 -
UVA post-exposure lamps N.14 60W 10R L.1200 N.14 60W 10R L.1200 N.17 80W 10R L.1500 N.28 80W 10R L.1500
UVC lamps N.13 36W L.1200 N.13 36W L.1200 N.16 60W L.1500 N.27 60W L.1500
Maximum thickness to be developed mm 7 7 7 7
Power kw 15 15 21 21
Power 230V 3PH+GND+60Hz
400V 3PH+N+GND 50Hz
Dimensions (LxWxH) (cm) 290x180x135 290x180x135 320x215x135 370x241x135